Applying labels to the base cover assembly
Note: Depending on the country or region of delivery, the labels might be slightly different from the ones in
the following illustration.
The new base cover assembly FRU is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the base cover assembly. For the labels that are not shipped with the new base cover
assembly, peel them from the old base cover assembly, and adhere them to the new one.
Table 5. All base cover labels
Label
Label description
1
Rating label
2
Rating print label
3
Argentina label
4
Taiwan label
5
Adapter label
6
Israel/US/CA/TW label
7
Indonesia rating label
8
South Africa label
9
India BIS label
10
Malaysia label
1020 Built-in battery
Important notice for replacing a battery
Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no
warranties for failures or damage arising out of their use.
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 34
Applied country/region
all
WW / India
Argentina
Taiwan
WW
Israel/US/CA/TW
Indonesia
South Africa
India
Malaysia
Label dimensions
66 mm x 24 mm
43 mm x 24 mm
68 mm x 6 mm
70 mm x 10 mm
65 mm x 20 mm
32 mm x 10 mm
26 mm x 10 mm
20 mm x 10 mm
22 mm x 30 mm
8 mm x 8 mm
.
Chapter 5
Removing or replacing a FRU
35