When installing: After the LCD elastic adhesive tapes are removed, they cannot be used anymore. New LCD
elastic adhesive tapes are required for replacement.
Installation steps of the LCD elastic adhesive tapes
1. Peel off the release liners from one side of the new elastic adhesive tapes
2. Apply the tapes to the correct locations
2030 Camera/microphone module
For access, remove these FRUs in order:
• "1200 LCD unit" on page 99
• "2010 LCD bezel" on page 103
• "2020 LCD panel and LCD elastic adhesive tapes" on page 104
106
L14 Gen 1 and L15 Gen 1 Hardware Maintenance Manual
2
.
1
.