Ice Making Section Set Up - Scotsman CME686 User Manual

Ice Making Section Set Up

Rotate the ice making section as needed to access
the right side, where the refrigeration connections
will be made. Connect the suction line to the back
fitting. Connect the liquid line to the middle fitting.
Connect the vapor line to the front fitting.
See Coupling Connections on the next page for
detailed instructions.
After couplings are connected, add cork-tape type
insulation to exposed fittings to reduce
condensation potential.
Vapor
Refrigerant Lines, Shown Routed Out The Top
Eclipseä 600, 800, 1000
Liquid
Suction
Add
insulation
Refrigerant Lines, Shown Routed Out the Back
April 2002
Page 23