ENCHANTED FOREST TZ46M4D82X00 Manual

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com OR +1 (888) 919-0070

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location .
2. Assemble the tree stand and place on a level surface. (See Fig. A) Then insert the tree pole tightly into the stand.
3. Sort all branches according to color codes marked on the end of each branch. Below is a list of the color codes for your tree.
(See Fig. B) (Please note: the number of rows may vary with different tree sizes.)
Fig. A - Tree Stand Assembly

SHAPING AND ADDING BRANCHES

1. Shape each branch by either placing the branch in a bracket which is at a comfortable level to work (Fig. 1), or holding
the branch in your hand with the hooked end pointing down. (Fig.2) Begin with the branches at the bottom of the tree
and work up towards the top.
Note: Do not step on the tree legs during the setup. This may deform the tree stand and may result in an unbalanced tree.
2. When shaping each branch, work from the branch hook and move outwards to the end tip of the branch. Start by
wrapping the back tip around the end of the branch stem to cover the branch wire. (Fig. 3)
3. Working from the branch's hook moving outwards, fan each tip out using this pattern: one tip to the right of the
branch's center wire, one tip to the left of the branch's center wire, one tip parallel to the branch's center wire. (Fig. 4)
Tips should be slightly offset from each other so that they do not line up exactly one behind the other. All tips should
be curved upwards when looked at from the side. (Fig. 5)
4. As each branch is shaped, place the color coded branch securely into the matching color coded bracket. (Fig. 6) As you
finish each level of branches, make sure the rows look evenly distributed to the levels above and below it. Adjust tips as
needed to even appearance. (If your tree includes branches with side wings, arrange these branches so that the wings
are on every other branch if necessary.)
5. When all the branches are shaped and put into their color coded matching brackets, shape the top section. Do this by
pulling down each row of tips in an even, circular pattern. (Fig. 7)
SKU#: 287-1419
MODEL #: TZ46M4D82X00
Polygroup®!
Fig.B
Insert and slide the legs
upward into the slots of the
base until firmly secured.
ROW COLOR CODED
WITHOUT COLOR
TREE TOP
A BLACK
B RED
C YELLOW
1