Left I/O Bracket - Lenovo 14W Gen 2 User Manual

Removal procedure
Note: You can use the folio mylar for more than once. Ensure that you put the new M.2 solid state drive into
the folio mylar before installation.

Left I/O bracket

Prerequisite
Before you start, read
Generic Safety and Compliance Notices
For access, do the following:
1. Disable the built-in battery. See "Disable Fast Startup and the built-in battery" on page 21.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Close the computer display and turn over the computer.
4. Remove the base cover assembly. See "Base cover assembly" on page 22.
24
Lenovo 14w Gen 2 User Guide
and print the following instructions.