Configuration Software; Acquisition And Control - Ebyte ME31-AAAX2240 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.
ME31-AAAX2240_UserManual_EN
V. Configuration Software

5.1. Acquisition and Control

Step 1: Connect the device to the configuration software.
（1）You can configure the device by selecting the interface (serial port/network port); if you choose the network
port, you must first select the network card and then search for the device.
（2）If you choose a serial port, you need to select the corresponding serial port number, and the same baud rate,
data bit, stop bit, parity bit and address segment search range as the device, and then search.
Step 2: Select the corresponding device.
31
Copyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd