For The Electrician - Scotsman CM500 User Manual

CM500
Installation

For The Electrician

This unit must be on a separate 115 volt AC 60
cycle single phase power supply. The maximum
fuse size for this circuit is listed on the nameplate,
and per the nameplate use fuses, or HACR circuit
breakers.
Electrical connections are made at the rear of the
ice maker, inside the junction box.
Follow All Local Codes - This Unit Must Be
Grounded. Usually a licensed electrician will be
required to connect the electrical service.
Hand Disconnect Switch
Junction Box
December, 1992
Page 7