Advertisement
Ethernet connection: WAN, red color
Ethernet connection: LAN, yellow color USB 2.0
Reset switch
Power plug connector
Power switch ON/OFF
Problem area, improved by EX400
Area that is good for placing EX400
Area covered by your router
For more information, please visit www.intenogroup.com/ex400
Router / Access Point (cable connection)
EX400 can be used as a router if configured as such. Connect EX400 WAN to your Internet service provider outlet.
WIFI: Repeater (wireless connection)
Place the EX400 in a good place (as shown below).
The EX400 now works as a repeater.
WIFI: Extender (cable connection)
Place the EX400 in a good place (as shown below). Connect the EX400 with an ethernet cable to your router. Put the cable in one of the LAN ports in your router and the other in the WAN port of EX400. This setup gives you the best performance.
EX400: Press and hold the WPS icon until the LEDS starts blinking. Then release and wait until only the WPS LED starts blinking.
Your router: Press WPS. The installation process is now in progress. It will take 1-2 minutes to complete. When the "Broadband" LED is yellow it means that WPS pairing was successful and your EX400 is connected to your router with the same name (SSID) and password as your router has. But if "Broadband" is still black, you must try again.
Connect your PC to the LAN of EX400.
Do not connect any cable on WAN of EX400. Start your web browser and type the address http://192.168.1.1, - a guide will show configuration options.
Other installation options may be supported Please check www.intenogroup/ex400 for latest updates.
For more information, please visit www.intenogroup.com/ex400
RF Exposure Statement: The minimum distance between the user and/or any bystander and the radiating structure of the transmitter is 20cm.
RF Output Power /Frequence usage: All operational modes: 2.4GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40), 5GHz: 802.11a, 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
The frequency, mode and the maximum transmitted power in EU: 2400 MHz – 2483.5 MHz: 19.99 dBm (EIRP), 5150 MHz – 5250 MHz: 22.91 dBm (EIRP), 5250 MHz – 5350 MHz: 22.91 dBm (EIRP), 5470 MHz – 5725 MHz: 29.95 dBm (EIRP)
RF Restriction: In EU, 5150 to 5350 MHz is restricted to indoor.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Inteno EX400 - WiFi Multi Device Easy Installation Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the EX400 that isn't answered in the manual? Leave your question here.