Cooper Lighting STS Square Tapered Steel STS7A30SFM1XG Specifications

P O L E S
STS SQUARE TAPERED STEEL
2 0 ' — 3 9 ' M O U N T I N G H E I G H T
MH
(mounting height)
handhole
12 5/16 "
B
Base View
S
BC
D
BP
AB
H
174 S T R E E T W O R K S O u t d o o r L i g h t i n g S o l u t i o n s
4
3
S P E C I F I C AT I O N F E AT U R E S
2
1 ... ASTM Grade steel base plate with ASTM A366 base cover.
2 ... Hand hole assembly 3" x 5" on STS poles.
3 ... Steel shaft 55,000 PSI. Shot blasted and painted with
1
polyester powder coat.
4 ... Drilled or Tenon (specify).
F O U R B O LT A N C H O R A G E
BC=Bolt Circle
BP=Bolt Projection
AB=Bolt Dimensions
D=Bolt Diameter
H=Bolt Dimensions
F I N I S H C O L O R S [ S e e o r d e r i n g i n f o r m a t i o n ]
5
F=Dark Bronze
G=Galvanized
V=Grey
W=White
Y=Black
WARNING: THE USE OF UNAUTHORIZED ACCESSORIES SUCH AS BANNERS, SIGNS OR PENNANTS FOR WHICH THE POLE WAS NOT DESIGNED FOR VOIDS THE COOPER LIGHTING
WARRANTY AND MAY RESULT IN POLE FAILURE CAUSING SERIOUS INJURY OR PROPERTY DAMAGE. COOPER LIGHTING'S POLE WARRANTY IS ALSO VOIDED IF
LUMINAIRE IS NOT INSTALLED AT TIME OF POLE INSTALLATION.
5 ... Anchor bolt per ASTM A576 with (2) nuts, (2) flat washer,
[ S e e o r d e r i n g i n f o r m a t i o n ]
and (1) lock washer. Nuts, washers and threaded portion
of bolt are hot dip galvanized. 3" hook for 3/4" bolt.
4" hook for 1" bolt.
C o o p e r L i g h t i n g