Table Of Contents; Overview; Before Using The Appliance For The First Time; Symbols And Markings - Bosch MaxoMixx MS8 GB Series Instruction Manual

Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.
Contents
Intended use ...............................................3
Important safety information .......................3
Overview.....................................................5
Before using the appliance for the
first time ......................................................5
Symbols and markings ...............................5
Parts and operating controls.......................5
Operation ....................................................6
Care and daily cleaning ..............................7
Troubleshooting ..........................................7
Recipes.......................................................7
Disposal ......................................................8
Guarantee...................................................8

Overview

X Fig. A
1 Base unit
a Speed setting
b On button Ã
c Turbo button Â
d Release buttons
e Power cord
2 Stainless steel blender foot
a Marking Í
b Blender blade
3 Blender jug
a Scale
b Lid
Accessories (separate instruction manuals)
4 Universal cutter L*
5 Universal cutter XL*
6 Whisk*
* Depending on the model
Before using the appliance
for the first time
Before the new appliance can be used,
it must be fully unpacked, cleaned and
checked.
Caution!
Never operate a damaged appliance!
■ Remove the base unit and all
accessories from the packaging and
dispose of all packing materials.
■ Check that all the parts are present and
examine them for obvious damage.
X Fig. A
■ Thoroughly clean and dry all parts
before using for the first time.
X "Care and daily cleaning" see
page 7

Symbols and markings

Symbol Meaning
i
Follow the instructions in the
operating instructions.
Marking on blender foot:
Only immerse the blender
Í
foot into the food as far as the
marking Í or there will
be a risk of electric shock!

Parts and operating controls

Speed setting
For continuous speed adjustment. Set the
rotary selector between ● (lowest speed)
and 12 (highest speed).
On button Ã
For using the appliance at the preselected
speed. The appliance will continue to run as
long as the button is pressed.
Turbo button Â
For using the appliance at the maximum
speed. The appliance will continue to run as
long as the button is pressed.
Note: The speed setting has no influence
on use of the Turbo button Â.
Contents en
5