Table of Contents
Advertisement
System
2nd
3rd
DisplayPort Ver.
Input Port Ver.
Volume
Eco Saving Plus
Description
Select the DisplayPort version to use.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
Select an HDMI version.
― The supportable device and resolution may differ depending on its version.
― When the version is changed, the screen may blink.
― If you set the HDMI Mode to 1.4, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
― When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
Change the
Volume
setting.
Reduce energy consumption compared to consumption at the maximum brightness level.
•
Off: Deactivate the
Eco Saving Plus
function.
•
Auto: The power consumption will automatically be reduced by about 10% over the current setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
•
Low: Saves up to 25 % energy compared to the maximum brightness.
•
High: Saves up to 50 % energy compared to the maximum brightness.
― This option is not available when
Picture Mode
― This menu is not available when
Game Mode
― This menu is not available when
Eye Saver Mode
― This menu is not available when
PIP/PBP Mode
is in
Dynamic Contrast
mode.
is enabled.
is enabled.
is enabled.
30
Advertisement
Table of Contents
