Page 1
USER MANUAL tactile switch sensor module WPSE310 whadda.com...
Page 2
If in doubt, contact your local waste disposal authorities. Thank you for choosing Whadda! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.
Page 3
This module contains a push button and a 10 K pull-up resistor. Specifications • voltage: 5 VDC • connection: 3 pins (+ (middle pin), ground and DO (data out)) • dimensions: 25 x 15 mm • weight: 2 g Connection Arduino® WPSE310 +5 V...
Need help?
Do you have a question about the WPSE310 and is the answer not in the manual?
Questions and answers