Remove The Camera - Lenovo Flex 7 Hardware Maintenance Manual

Figure 40. Remove six screws and remove the hinges
Screw specifications
M2.5 x L3
Go to
https://support.lenovo.com/partslookup
part:
Hinges

Remove the camera

Make sure the following FRUs (CRUs) have been removed.
"Disassemble the LCD unit" on page 48
"Remove the hinge cover" on page 48
"Remove the LCD panel and EDP cable" on page 48
Step 1. Disconnect the camera cable from the camera board and then remove the camera.
Figure 41. Disconnect the camera cable from the camera board and remove the camera
Go to https://support.lenovo.com/partslookup
replacement parts:
Camera
52
Hardware Maintenance Manual
Number of screws
6
to look up the Lenovo part number of the following replacement
to look up the Lenovo part numbers of the following