Table of Contents
Advertisement
5. Install the heat sink and fan assembly by aligning the fasteners on the heat sink with the corresponding
mounting holes on the system board, and then press the fasteners to secure the heat sink and fan
assembly to the system board.
6. Turn over the system board so that the top of the system board is facing up.
7. Install the system board. See "System board" on page 67.
8. Reinstall the removed parts.
9. Place the computer in an upright position.
10. Reconnect the power cord and all disconnected cables to the computer.
.
Chapter 6
Hardware removal and installation
71
Advertisement
Table of Contents
