Sceptre S300P Installation

Scanner installation Scanner installation
Scanner installation Scanner installation Scanner installation
Unlock the scanner
Connect the S300P to the PC & Printer
Install all the related software applications
1. IMS Shell
2. Vividscan II TWAIN driver
1. 1. 1. 1. 1. Unlocking the S300P scanner Unlocking the S300P scanner Unlocking the S300P scanner Unlocking the S300P scanner Unlocking the S300P scanner
2. 2. 2. 2. 2. Connecting the S300P to a PC and Connecting the S300P to a PC and Connecting the S300P to a PC and Connecting the S300P to a PC and
Connecting the S300P to a PC and
Printer Printer
Printer Printer Printer
a . Power off the computer and any devices
that are connected to it (e.g., monitor,
printer or modem)
b . Disconnect the printer cable from the printer
port in the back of your PC.
c . Take the disconnected end of the printer
cable and attach it to the port in the back
of the S300P scanner. Tighten the retain-
ing screws.
d . Connect one end of EPP cable to the
printer port in the back of your PC and
tighten the retaining screws.
e . Connect the other end of the EPP cable to
the port in the back of the scanner of
computer port.
f . Connect the power adapter to the S300P
scanner and plug it into an appropriate
power outlet.
g . Power on the computer and wait for the
computer to finish booting up.
h . Install the scanner driver (Vividscan II
TWAIN driver) and application software
(IMS Shell) by referring to the next sec-
t i o n .
S300P EZ - INST ALL S300P EZ - INST S300P EZ - INST
S300P EZ - INST S300P EZ - INST
!
!
ALL A A A A A TION ALL ALL TION TION TION
ALL TION
3. 3. 3. 3. 3. Install software applications - IMS Shell Install software applications - IMS Shell Install software applications - IMS Shell Install software applications - IMS Shell
Install software applications - IMS Shell
& scanner TWAIN driver & scanner TWAIN driver
& scanner TWAIN driver & scanner TWAIN driver & scanner TWAIN driver
a. Start Windows 95.
b. Place the CD into your CD-ROM drive.
c. Click on "Start" and select "Run" from the
pop-up menu.
d. Type "Drive:\install.exe" (Where drive is
your CD-ROM drive) in the "Open" box.
e. Click on "OK" to confirm and follow the
instructions on the screen to install the
IMS Shell & scanner TWAIN driver.
1