Preparation Before Use - KANDA QooCam EGO User Manual

Preparation before Use

Charging QooCam EGO
Connect a USB adapter (not included) to the
USB-C port using the power cable (included).
When the battery level is lower than �%, QooCam EGO will automatically shut down, stop
video recording and save the file.
It takes �� minutes for fully charging with a �V/�.�A adapter under laboratory environment.
Charge QooCam EGO when the battery level is low. Storing QooCam EGO more than four
months with low battery will reduce the battery life. Charge and discharge the battery of
QooCam EGO to ��%-��% if it will not be used for �� days or more.
When charging with the power on, the camera will detect the battery's temperature. It will
automatically stop the power supply when the temperature of the battery is over than
maximum or lower than the minimum.
A battery should be inserted when updating firmware. The battery level of the inserted battery
should be higher than ��%.
The battery door can be removed when charging
EN