Magnum First M9-EBOX Setup Manual page 12

Configuration Process
To add outputs to the EBOX, select profile and manufacturer and click on the "+".
Options:
- Rename:
- Delete:
- Add to sensor list:
- Destination / MsgServer:
- Send LRN:
- LRN(3x):
- LRN(UTE):
- Change BACnet ID:
Renames the output. Renaming allows you to add additional information to
each BACnet point that a device creates. You are able to add text to the
beginning / end of the Name or Description to provide additional identifiers
(Room numbers, Office names, etc.).
Deletes the output.
Adds output to the sensor list so it can be used as an input for the device it is
supposed to control
Some devices need to be addressed (instead of using broadcast messages).
Others may only be able to receive commands in a very short window, after
they have sent a message themselves. Both can be configured here. Please
refer to the device manual.
Sends a learn telegram to the sensor. LRN sends 1 4BS learn telegram
Sends 3 consecutive learn telegrams.
Sends 1 UTE telegram (please refer to device manual)
Take from input
12