HengZeng Technology HT-043 Instruction Manual

Table of Contents

Download this manual

The product is a wearable (watch, launch with time function) pet wireless dog

training collar, easy to carry.The control distance is between 100-150 meters. Voice,

vibration, electric shock 3 training mode. A transmitter can train many pets in a same time

with extra receiver, all the receivers should get a same code. A transmitter can train 1-3

pets in a different time, the receiver need get a different code (that is, the first receiver to

get the left side A code, the second receiver to get the middle B code, The three receivers to

get the upper right C code)

Transmitter

MODEL

1、 Adjust Time：

choose correct time，press MODE button again，minutes flash，press LEVEL/+ and

DOG/-to choose correct time

2、 Adjust training mode：

and shock shows on the screen

HT-043 Instruction Manual

DOG/- Dust cap Charging port

Press mode button； hours flash， press LEVEL/+ and DOG/-to

LED light

Press mode number，you can see voice,vibration

LCD screen

LEVEL/+

Table of Contents

Need help?

Do you have a question about the HT-043 and is the answer not in the manual?

Page 1 HT-043 Instruction Manual The product is a wearable (watch, launch with time function) pet wireless dog training collar, easy to carry.The control distance is between 100-150 meters. Voice, vibration, electric shock 3 training mode. A transmitter can train many pets in a same time with extra receiver, all the receivers should get a same code.
Page 2 3、 Adjust Strength ： in the model of shock and vibration,you can choose different strength(1 to 4) by pressLEVEL/+ 4、 Adjust pet： Press Dog button,it will show different dogs-ABC 5、Ok button is used to lauch signal,press OK button,the transmitter will give out 915M high frequency signal in the mean time,led light will light on;no press ok button,then no signal,no light 6.Match code,hold LVEL/+ and DOG/- button at a same time,there will be a L shows on...
Page 3 § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.