Do you have a question about the GHP38 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Alva GHP38
Page 1
SOUTH AFRICA THIS APPLIANCE Manufactured for A division of Stingray Accessory Manufacturers (Pty) Ltd I PO Box 30014 Tokai 7966 I +27 21 442 1540 info@stingray.co.za I www.alva.co.za TOLL- FREE NUMBER: 086 100 ALVA (2582) and distributed by /alvagas /AlvaGas...
Page 2
Retain this manual for future reference. • THIS UNIT MUST BE THOROUGHLY CHECKED BEFORE • • • • • • • Phone the customer care line at 086 100 ALVA (2582) or email • • • • • • • •...
Important information METHOD OF ASSEMBLY FIRE PIT SET UP SAFE APPLIANCE LOCATIONS Cautions and warnings. LEAK TEST OPERATION INSTRUCTIONS FLASHBACK Danger CHANGING YOUR CYLINDER MAINTENANCE 9-10 SPECIFICATIONS Contact an approved ALVA technician. FREQUENTLY ASKED QUESTIONS TROUBLESHOOTING GUIDE Do It Yourself...
WARRANTY PLEASE RETAIN YOUR PROOF OF PURCHASE FOR Thank you for your purchase of this these instructions carefully before use and keep them in a safe place, for future reference. Not using appliances according to the instructions is extremely dangerous and can lead to property damage, injury or death.
METHOD OF ASSEMBLY WARNING: vdirectly on an ALVA 9kg industrial cylinder with a 5/8" HORIZONTAL exit valve.It is NOT to be used on a domestic cylinder with a 3/8" VERTICAL exit valve. FIRE PIT SETUP Exploded View Glass Flame Protector...
Step 3 Position the Glass Flame Protector on the supports Warning: DO NOT Glass Flame TOUCH GLASS FLAME Protector PROTECTOR when it is working or 30 minutes after SAFE APPLIANCE LOCATIONS Minimum NOTE: 500mm This appliance is for outdoor use only Base...
• • • • LEAK TEST How to do a leak test Connection in assembly Foamy bubbles http://www. indicate a leak youtube.com /watch?v=8L pZ1B0m23Y &feature=plcp FOR YOUR SAFETY IF YOU SMELL GAS • If you are unsure or if you cannot •...
OPERATION INSTRUCTIONS Lighting operation should comply with the BEFORE TURNING THE GAS SUPPLY ON: lighting instructions section. Failing to do this will cause serious injury or explosion. BEFORE LIGHTING: LIGHTING: HIGH FIGURE D HIGH FIGURE E NOTE: If the burner fails to remain lit, all valves should be closed and a waiting period of at least 1 minute should pass before attempting to light again.
FOR YOUR SAFETY Be careful when attempting Holding in the control knob for more than 10 seconds before igniting the gas - will cause a ± Fig. G ± ± ± FOR YOUR SAFETY NOTE: Fire pit will be hot after use. DO NOT COVER THE BURNER AND LAVA ROCKS UNLESS Handle with extreme care.
FREQUENTLY ASKED QUESTIONS If you are still unable to correct the problem with the information in this guide , then you need to contact your nearest dealer or manufacturer.
TROUBLE SHOOTING GUIDE How to test if your cylinder TROUBLE CAUSE REMEDY is overfilled process will always http://www. youtube.com/ watch?v=Ya vsYE8nzCw &feature=plcp Always ensure there is Ventilation Replace with a full Replace with new AA up - OFF position let with the information appliance cool, manufacturer...
Page 16
AFTER SALES SERVICE MANUFACTURED FOR AND DISTRIBUTED BY ALVA, Tel: 021 442 1540 TOLL FREE NUMBER...
Need help?
Do you have a question about the GHP38 and is the answer not in the manual?
Questions and answers