Events - Axis 01152-001 User Manual

AXIS M30 Series
Setup
How to reduce bandwidth and storage
Important
If you reduce the bandwidth it can result in less details in the picture.
1. Go to live view and select H.264/H.265.
2. Go to Settings > Stream.
3. Do one or more of the following:
- Turn on the Zipstream functionality and select the desired level.
- Turn on dynamic GOP and set a high GOP length value.
- Increase the compression.
- Turn on dynamic FPS.
How to set up network storage
To store recordings on the network, you need to set up network storage:
1. Go to Settings > System > Storage.
2. Click Setup under Network storage.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click Connect.

Events

About events
The event pages allow you to configure your product to perform actions when different events occur. For example, the product
can start a recording or send an email notification when motion is detected. The set of conditions that defines how and when
the action is triggered is called an action rule.
How to trigger an action
1. Go to Settings > System > Events to set up an action rule. The action rule defines when the product will perform certain
actions. Action rules can be setup as scheduled, recurring, or for example, triggered by motion detection.
2. Select what Trigger must be met to trigger the action. If you specify more than one trigger for the action rule, all
of them must be met to trigger the action.
3. Select which Action the camera should perform when the conditions are met.
Note
If you make changes to an active action rule, the action rule needs to be restarted for the changes to take effect.
Note
If you change the definition of a stream profile used in an action rule, you need to restart any action rules that use that
stream profile.
12