Audio Output Mode - Sanyo VHR-H619 Instruction Manual

AUDIO OUTPUT MODE

Use the VCR setup menu to select the desired audio
output mode when playing a tape or viewing a television
broadcast.
NOTE:
Audio output mode selection is not required when
playing back a tape recorded in mono or viewing a mono
TV program.
1
Follow the "Before starting" steps on page 19.
2
Press the MENU button.
The main MENU appears.
3
Press the CH/TRACK l (or j) button to select the
VCR setup option, then press the SET button.
The VCR setup menu appears.
CATV/TV@@@@@@@...CATV@TV
Cable@box@@@@@...No@@@Ch02
MTS@@@@@@@@@...ST@SAP@Mono
Audio@out@@@...ST@L@R@Mono
Child@Lock@@@@@On@@...Off
Off@timer@@@...Off@2Hr@6Hr
Auto@AV@Select@On@@...Off
[CH§‡]†Option
[SET]†Select@@[MENU]†TV
4
Press the CH/TRACK l (or j) button to select the
Audio out option, then press the SET button to select
the desired mode, as indicated by the "z".
ST (STEREO): The left channel sound is heard from
the left speaker and the right channel sound is
heard from the right speaker.
Use this setting to listen to a stereo program or
tape in stereo.
L: Left channel sound is heard from both speakers.
Use this setting to listen to the left channel of a
stereo program or the main audio of a program
that contains an SAP soundtrack.
R: Right channel sound is heard from both speakers.
Use this setting to listen to the right channel of a
stereo program or the SAP soundtrack (if
available).
Mono: The sound from the normal audio track (mono
or second audio) is heard from both speakers.
5
When finished, press the MENU button to exit the
menu.
29