Welcome Congratulations on your purchase! This manual tells you all you need to know about using your new BAUHN product. ® Please take special note of any important safety and usage information presented with the symbol. All products brought to you by BAUHN are manufactured to the highest standards of performance and safety and, ®...
Contents Welcome Unpack and Prepare Product Overview Remote Control Wireless Microphone Operation Troubleshooting Specifications Compliance and Responsible Disposal Warranty Information Repair and Refurbished Goods or Parts Notice...
Unpack and Prepare What's in the box Before setting up your new product, check you have everything: A. Portable Party Speaker B. Remote Control C. AAA Activ Energy Batteries (2) D. Wireless Microphone E. AA Activ Energy Batteries (2) AC-DC Power Adaptor G.
Product Overview Speaker Overview Control Panel (see next page) LED display screen & Remote sensor FM antenna (back of speaker) Back Panel Tweeter DC INPUT 2.4A Woofers DC Input: connect the supplied AC-DC power adaptor to an external power supply to power the speaker. See the next page for the control panel buttons PRODUCT OVERVIEW | 5...
Page 6
Control Panel 1 2 3 4 9 ECHO+ : increase microphone echo volume level 10 MIC VOLUME control knob : use to adjust microphone POWER volume level. The LED lights on the knob will flash 11 ECHO- : decrease microphone echo volume level GUITAR IN MIC 1 MIC 2...
Remote Control Setup Insert the supplied AAA Activ Energy Batteries according to the polarity markings (+ / -) inside the compartment. Make sure the batteries are correctly aligned and properly pushed AAA size into place. batteries included Precautions When Using Batteries •...
Page 8
Remote Overview : press to enter standby mode MODE : press to switch between input modes. Press and hold to enter/exit MUTE : mute the sound. Press again to microphone priority mode unmute LED : press to change the speaker light : play next song effect.
Wireless Microphone Setup Insert the supplied AA Activ Energy Batteries according to the polarity markings (+ / -) inside the compartment. Make AA size batteries sure the batteries are correctly included aligned and properly pushed into place. Precautions When Using Batteries •...
Operation Charging and Power on • Charging: plug in the supplied AC power adaptor to the DC IN port (located back of speaker) to charge the speaker for 8 hours before use. During charging, the battery icon on the LED display screen will display the remaining battery capacity and the charging LED indicator will light up red.
Page 11
"Bluetooth mode." • On your smart phone, search for "BAUHN APPS-0723." If a password is required, enter "0000". If pairing is successful, the LED display screen on the speaker will display "bLUE". You can now play music from your smart phone.
Page 12
USB Mode • Insert your USB device (not included) into the USB slot on the speaker. The speaker will automatically play the files. • Press the button on the speaker or on the remote control to play/pause music. • Press the buttons on the speaker or on the remote control to select the previous or next track.
Page 13
Recording • Plug in your USB device or Micro SD (TF) card into the USB/Micro SD (TF) card slot on the speaker. The speaker will automatically play the music files. • Press the REC button on the speaker to playback the recordings on the USB/ Micro SD (TF) card. Press the buttons on the speaker to select the previous or next recording.
Troubleshooting To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this unit, check the following points before requesting service. Problem Solution No power • Ensure that the battery is charged or the power adaptor is connected. •...
Page 15
Problem Solution • Ensure you have paired the speaker with your Bluetooth enabled device. Unable to find BAUHN • Ensure the Bluetooth function is activated on your Bluetooth enabled device. APPS-0723 in the • Onl once device can be connected paired with the speaker at a time. Please disconnect Bluetooth...
AC 100-240V, 50/60Hz AC-DC Adaptor - output DC 15V 2.4A Sealed Lead Acid Battery 12V, 4.5A Speaker 2 x 50W Audio output power 80W RMS BAUHN APPS-0723 Bluetooth pairing name ® > 8m Bluetooth ® pairing operation range For Technical Support:...
Compliance and Responsible Disposal Packaging Compliance The packaging of your product has been This product complies with the Australian Safety selected from environmentally friendly Standard AS/NZS 62368.1 to ensure the safety of the materials and can usually be recycled. Please ensure product.
Warranty Information The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour.
Repair and Refurbished Goods or Parts Notice Unfortunately, sometimes faulty products are manufactured, which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost.
Page 20
Online support Visit bauhn.com.au for the latest User Manual for information on the updated features. Warranty returns tempo.org/support Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product.
Need help?
Do you have a question about the APPS-0723 and is the answer not in the manual?
Questions and answers