VUBER DABBER 2.0 User Manual

DABBER 2.0
USER MANUAL
The Vuber Dabber 2.0, designed
to deliver powerful dabs on the go.
No coils, torches, or butane needed.
WHAT'S INSIDE
CERAMIC DAB TOOL
MAGNETIC CARB CAP
GLASS ATTACHMENT
TITANIUM NAIL
HEATING ELEMENT
POWER BUTTON
1500MAH LI-ION BATTERY
USB-C Charging Cable
Quartz Nail Ceramic Nail

FEATURES

- Consistent, even temperatures each time.
- 15 second warm up to 550°F or 650°F; lasts
30 seconds for one cycle.
- 1500 mAh powerful battery core.
- Easy to use and portable size.
- Three types of nails (Titanium, Quartz &
Ceramic) are included for personal preference.
- Unique glass structure design allows for
superior water percolation.

OPERATION

1. Charge the Dabber 2.0 before rst use.
2. Fill the glass to approximately 1/3 to 1/2 full with
cool water.
3. Press the power button 5 times rapidly to turn the
Dabber 2.0 on and o .
4. When powered on, press the power button 2 times
to cycle temperatures. The the light will ash 3 times
in BLUE and last for 5 seconds indicating it is set
to 550°F. Press the power button 2 times to change
the temperature to 650°F - the light will ash 3 times
in RED and last for 5 seconds indicating that the
temperature has been changed.
550°F - Press the power button 3 times. The light
will turn BLUE to indicate the nail is heating. After
15 seconds the light will turn GREEN and the
Dabber 2.0 is ready to use. After the cycle has
completed, you can press the button three times
and the heat cycle will start again.
650°F - Press the power button 3 times. The light
will turn RED to indicate the nail is heating. After
15 seconds the light will turn GREEN and the
Dabber 2.0 is ready to use. After the cycle has
completed, you can press the button three times
and the heat cycle will start again.