Table of Contents
Advertisement
2. Align the base with the neck piece and slide it into place as
shown.
3. Using a Phillips screwdriver, tighten three (3) M4 12mm
screws into the bottom of the base to secure it to the neck
piece.
4. Align the stand with the bottom of the TV and slide it into
place as shown.
5. Using a Phillips screwdriver, tighten two (2) M6 12mm screws
into the back of the TV to secure the stand to the TV.
6. When you are finished, place the TV on a stable,
level surface.
5
1
Advertisement
Table of Contents
