Identification - Busch-Jaeger SAP/S.13 Product Manual

7.10.1

Identification

If after positioning on the floor plan there are several possible devices in the pop-up window for
selection, the device which switches the desired function must now be selected.
Identification via serial number
Compare the three-digit character code and the serial number of the identification label on
■
your device plan, or on the device with the numbers in the list, and in this way identify the
device you are searching for and, if necessary, also the channel.
Fig. 24: Identification via serial number
Identification via local operation
Actuate the device that is to be linked with the selected application.
Actuator: Press the "Ident" button on the device.
■
Sensor: Press the rocker.
■
Movement detector: Cover the lens with the hand.
■
The associated device is selected automatically. In case an actuator has several channels, you
need to select the correct channel.
Fig. 25: Identification via local operation
Identification via switching (only suitable for actuators)
1. Select a device and a channel from the list.
Product manual 2CKA001473B9725
Commissioning
│43