RIC Dragon-CR435S B Quick Operation Manual

Quick
Operation Guide
Dragon-CR435S B
RIC hearing aid
Please download and install "HA-Fit" APP first.
Charge the Device
Remove the film
1
Hearing aid charging indicator
White light
L R L
Charging
Put the devices into the charge case then connect thety
2
pe-C/USB cable to charging
Power on / off
Automatic on
Turn on--device be
takeout of the charge
case
Automatic off
Turn off--device be
putted into the charge
case
Front-end microphone
Program/
Volume button
Back-end
microphone
Charging contact point
Accessories
Place the hearing aid
2
behind the ear. The
curve of the sound tube
should fit comfortably
on top of your ear.
Light off
R
Full charged
If the earplus not fitting, replace it.
Press- the upper
button to
increase the volume
Press- the down
button to
increase the volume
Hearing Aid
Earplug
Receiver
Sound tube
x2 x2 x2
x2
x2 x2 x2
Earplugs
Prepare for Use
Wearing Test
Gently insert the
1
earplug into the
ear canal.
Use Guidance
Mode / Volumes
Long press mode
toggle increment
Long press mode
toggle decreasing
3 beeps indicator the MAX or MIN volume level
1 beep means mode 1(Indoor mode)
2 beeps mean mode 2(Noise cancelling mode)
3 beeps mean mode 3(Outdoor mode)
Charging Box
Hearing aid
charging indicator
Charging Point
x1
Charging Cable Cleaning brush
Replace the earplugs
Choose a fitting dome
1
And then try to
3
pull the earplug lightly
to make sure that it
will not come off
Low Battery Reminder
There are low battery warning signal beep sounds every
one minute until the battery runs out. So please charge
the hearing aids when you hear the beep.
Mirror
1.Charging
box indicator
2.Charging Port
x1
x1
Wax Guard
lnsert the earplug
2
straight and insertit
gently