Fisher SLIM-3010 Instruction Manual page 6

LOCATION OF CONTROLS - UNIT (cont.)
35. SURROUND Button
Press to turn the surround sound ON or
OFF. The indicator lights while surround
is ON.
36. DYNAMICBASS Button
Press for a rich bass sound.
37. EQ Button
Selects FLAT, POP, ROCK, JAZZ and
DISCO sound effects
38. STEREO Button
Stereo / mono switching for FM stations
39. PRESET/REPEAT Button
-Retrieve preset radio stations (Forward)
-Repeats track / 1 disc / all discs for CD
mode
40. 3 CD Changer Compartment
41. CD-TUNER-SKIP Button
-Manual tuning, station search (Forward)
-CD forward title selection, forward
search operation
42. CD-TUNER-SKIP Button
-Manual tuning, station search
(Backward)
-CD reverse title selection, reverse
search operation
MP3 MODE Button
43.
Selects MP3 TITLE & ARTIST or ALBUM
44. AC Socket
Main power connection
NOTE:
If the system is connected to the power
voltage, part of the machine is in
operation due to the stand-by function. In
order to switch off the system completely,
pull out the power plug from the power
socket.
45. Subwoofer Jack
To connect powered subwoofer (not
supplied)
46. DC 14V Jack
Connects to CAR/BOAT adapter
47. AM Antenna
AM antenna connection socket (connect
frame antenna included in this package)
48. Wall Mounting Holder - Center unit
Used to mount the center unit on a wall
49. Wall mounting Holder - R-Speaker
Used to mount the R-speaker on a wall
50.
Wall mounting Holder - L-Speaker
Used to mount the L-speaker on a wall
51. Reset Switch
If the system does not display
information, or the data appearing is
wrong, press the "RESET" switch with a
sharp object, e.g. needle or ballpoint pen.
The data must then be re-entered.
52. FM Antenna
Note - Do not connect to external antenna
53. Speaker Terminal
54. Battery Compartment
Batteries (3 x 1.5V "AA" size) for power
back-up of time and programmed radio
stations.
9
INSTALLATION (Unit)
INSTALLATION PEDESTAL
1. Carefully align the unit tabs onto the pedestal holder (1).
2. Push the unit backward until it clicks (2).
2
1
DISASSEMBLE PEDESTAL
1. Press down both side of safety lock ribs (3) then push forward slightly (4) at the same time.
2. Hold onto the unit (5) then push forward (6) again carefully to release the unit from the
pedestal.
3
4
5
3
6
10