Advertisement
Quick Links
Advertisement
Summary of Contents for eelo CYGLO
- Page 1 ® CYGLO Cycling Backpack with LED Signal Light User Guide...
- Page 2 Thank you for purchasing the eelo cycling backpack. In order to use and maintain this product correctly, please read this user guide completely. This product has been specifically designed to keep cyclists safe at dusk/night time. When in use the bright LED signal display will alert motorists of your presence and next intention.
- Page 3 What this package contains: • One backpack • One LED display • One remote controller with adjustable plastic mount • One charging micro-USB cable • One user guide Components 1. On/Off Button 6. Hazard Signal 2. LED Signal Light 7. Signal Selection 3.
- Page 4 Speci cations Wireless frequency: 2.4GHz Transmission distance: 3-5 meters Remote Control Battery: 3.7 V, 250 mAh rechargeable Lithium battery (directly plugs into the USB power adapter to charge) Working time: 20 hours Charging: DC 5 V 500 mA LED Display 3.7 V, 1150 mAh rechargeable Lithium battery (directly plugs into the USB power adapter to charge) Working time: 8 hours continuously...
- Page 5 LED Display: Power on: Press the On/Off button. Four different LED signal lights will light up one by one as shown below. The LED display will then go into stand-by mode. It won’t be re-activated until the remote controller is on. Power o : Press the On/Off...
- Page 6 How it works There are two different working modes that work insync depending on how the remote control is operated: • Manual control • Automatic Mode Manual control mode: Navigation arrows will display when you slide the button to the left or to the right. White cycling-shape LED signal light will display when you push the button forward.
- Page 7 A. Cycling Signal: White cycling-shaped LED signal lights. B. Left-turning Signal. C. Right-turning Signal. Hazard Signal: Use when you have stopped or there is an incident ahead.
- Page 8 Automatic modes: After 7 seconds of remote control inactivity, automatic mode is activated by the motion sensor built inside the remote control. The white cycling signal flashes when you’re cycling normally. If you are standing still or break suddenly, the motion sensor built inside the remote control will automatically trigger the the flashing hazard signal.
- Page 9 How to install & remove remote controller How to install: How to remove: • • Loosen RC mount Clip o...
- Page 10 How to charge: • Fully-charged indicator (Blue) • Charging indicator (Red) • Power Capacity indicator <30% (Red) Micro-USB cable to charge • Fully-charged indicator (Blue) • Charging indicator (Red) • Power Capacity <30% / Power on (Red)
- Page 11 A. The device has most likely run out of battery charge, recharge the LED display and try again. Contact Us Should you need assistance using your CYGLO LED Backpack, please call or email our friendly technical support team who will be happy to help.
- Page 12 ® www.eeloproducts.com...
Need help?
Do you have a question about the CYGLO and is the answer not in the manual?
Questions and answers