Samsung DV431AG User Manual page 23

digital Graphic
2
display
Select cycle
3
option
dry level
4
Selection button
DV431AEP-03021D_EN.indd 23
The display window shows the estimated time remaining in the cycle after the
Start/Pause button is pressed. The estimated time remaining may fluctuate as
the cycle progresses.
The Drying light will illuminate and remain lit until the cycle is complete.
When your dryer is in the cool-down phase, the Cooling light will illuminate.
When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will
illuminate.
When the cycle is complete, "END" appears in the display panel until the
dryer door is opened, the Power, Close or Start button is pressed or about 5
minutes have passed.
If your dryer is paused during a cycle, the indicator lights will blink until the
Start/Pause button is pressed.
Wrinkle Prevent -Wrinkle Prevent provides approximately 180 minutes
of intermittent tumbling in unheated air at the end of the cycle to reduce
wrinkling. Press the Wrinkle Prevent button to activate this feature.
The indicator light above the pad will illuminate when Wrinkle Prevent is
selected.
The load is dry, and can be removed at any time during the Wrinkle Prevent
cycle.
Mixed Load bell - This is an alarm that notifies the user when the average
dry level is damp dry (80 % dried). This is useful when the laundry contains
various types of clothing you do not want to dry completely. An alarm sounds
for five (5) seconds while continuing to perform the cycle.
This function can only be selected in the Sensor Dry course, and the dry level
can only be selected from among Normal Dry, More Dry, Very Dry.
Delay Start : Any cycle can be delayed for up to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be
started
My Cycle : Choose your favorite cycle including cycle, temp, dry level option,
etc. (See page 25 for detail.)
Rack Dry : Rack Dry is available at Time Dry cycle. Temperature will be set
only to Extra Low. (See page 26 for detail.)
Adjust Time – Time can be added or subtracted from the automatically set
times in the Manual Dry cycles (Time Dry, Quick Dry, Air Fluff cycles).
To add or subtract time from the cycle, press the Adjust Time arrow pad up
or down until the desired time is displayed.
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
press the Dry Level button. An indicator light will illuminate next to the desired
dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier
loads may require the Very Dry or More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some
moisture in the clothing at the end of the cycle. Damp Dry is designed to
partially dry items. Use for items that lay flat or hang to dry.
operating Instructions, tips _23
2012-02-01 2:59:33