User’s manual 1060661 Call module TK Home Solutions B.V. TABLE OF CONTENTS Introduction ......................4 Making a call ......................4 Disconnecting ......................5 Choosing the next number ..................5 Accepting incoming calls ..................6 Error codes ......................6 Reference: 003 – 1060661 Call module user’s manual partially page 2 of 6 Version: A.2 State: Released...
Page 3
User’s manual 1060661 Call module TK Home Solutions B.V. FCC and IC Declarations Compliance statement Canada & FCC (part 15.19) This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and complies with part 15 of the FCC Rules.
This manual has been derived from the host manual the RP00-CU stairlift. This document describes the use of the Call module as mounted in a RP00-CU stairlift The Call module (CM) is an optional function of a stairlift. This option makes it possible to communicate via a landline with up to three pre-programmed telephone numbers, for example in case of an emergency.
User’s manual 1060661 Call module TK Home Solutions B.V. 1.2 Disconnecting 1. Press the yellow alarm button for 4 to 7 seconds. The light on the alarm button turns off. The call has now ended. It is also possible for the person being called to hang up. 1.3 Choosing the next number If the connection to the first contact does not succeed, you can choose to go to the next pre-programmed number.
User’s manual 1060661 Call module TK Home Solutions B.V. 1.4 Accepting incoming calls The landline is connected to the Call module. An incoming call can therefore also be accepted while using the stairlift. When there is an incoming call, the Communication Module produces a ring tone. Accepting the call is done as follows: 1.
Need help?
Do you have a question about the RP00-CU and is the answer not in the manual?
Questions and answers