Advertisement
Quick Links
Advertisement
Related Manuals for CellGate WATCHMAN EVO WP460 Series
Summary of Contents for CellGate WATCHMAN EVO WP460 Series
- Page 1 2018 WP460 Series Quick Install Guide CellGate Support: 972-231-1999 option 2...
- Page 3 Ethernet Switch Interface Circuit Board...
- Page 4 Ethernet cable into the only network ports on the it that can connect to 3G/34 router, then to Cellgate Mobile Connect app. The protocol is TCP/IP.) ■ On WP460 series, press the “Enter Code” button on the home screen of the Watchman unit, enter the device number, and then press Open.
- Page 5 Confirm a picture was received. Press “Back” in the top left. Select the Watchman Gate Press the “Open Momentarily” button. The gate should open for the duration set in the timer and the Watchman should audibly confirm “Access Granted”. 12a. If the Watchman does not say “Access Granted”...
- Page 6 After login initiate a call from the Watchman unit. WP460 Se ries During the call you should see live video feed in the Watchman app and hear audio from both the app and the Watchman unit. Press the Open button. You should hear a tone from the Watchman unit and the gate should open. Congratulations! You have successfully activated the Watchman! Please leave the customer a key for their Watchman.
- Page 7 FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. ...