Russell Hobbs RHS04 Warranty And Instructions page 5

•
Once styling is completed, unplug the appliance and leave to cool completely
before packing away for storage.
•
Make sure that during usage the cord does not come into contact with the hot
parts of the appliance or other hot surfaces.
•
Do not roll the power cord around the appliance.
•
Never unplug the appliance by pulling on power cord or the appliance itself.
•
Do not touch the appliance when hands or feet are wet.
•
Do not use the appliance outdoors.
•
This unit is intended for household use only. Industrial or Commercial use
invalidates the warranty.
•
Close supervision is required when the appliance is used near or by children and
invalids.
•
Before carrying out any cleaning or maintenance operation, unplug the appliance
from the socket and leave the straightening plates to cool.
•
Avoid allowing the hot plates of the straightener to come into contact with the face,
neck or scalp.
IMPORTANT INFORMATION
•
Ensure that your hair is clean and tangle free.
•
If you normally use a heat protection or iron oil spray, this can be applied now
before combing or brushing through hair to remove snags and tangles.
•
The appliance has been designed so that as well as being able to be used as
a dry hair straightener, it can also be used prior to blow drying on towel-dried
hair. After washing and conditioning as normal, dry hair with a towel ensuring
no dripping water remains in the hair.
•
Only hold the appliance by the handle. Avoid touching the hot plates
•
Do not scratch the surface of the plates as this will decrease the effectiveness
of the ceramic coating.
SAFETY
•
Please note that the straightener has a built-in safety device that switches the
unit off 60 minutes after the appliance has been switched on. If this occurs, it
can be reset by sliding the power switch to OFF position and then switching it
on again.
5