Sony SLV-XA127PL Operating Instructions Manual page 9

Antenna hookup
Make the following connections if your TV doesn't have A/V inputs.
A Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
This unit
VHF/UHF
IN
OUT
Antenna cable (supplied)
B Use this hookup if you're using a VHF-only antenna (you get
channels 2–13 only)
This unit
VHF/UHF
IN
OUT
Antenna cable (supplied)
If you cannot connect your antenna cable to the unit directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 20.
Rear of TV
VHF/UHF
A
Match the type of
connector on your
or
TV: A, B, or C.
VHF
B
UHF
or
VHF
C
UHF
Rear of TV
VHF/UHF Match the type of
connector on your
A
TV: A, B, or C.
or
VHF
B
For connector types
B and C, no UHF
UHF
connection is
or
required.
VHF
C
UHF
continued
9
Getting Started