Table of Contents
Advertisement
TEMPERATURE CONTROL AND ADJUSTMENT
2
The interior temperature of your refrigerator changes for the following reasons;
• Seasonal temperatures,
• Frequent opening of the door and leaving the door open for long periods,
• Food put into the refrigerator without cooling down to the room temperature,
• The location of the refrigerator in the room (e.g. exposing to sunlight).
• You may adjust the varying interior temperature due to such reasons by using the
thermostat. Numbers around the thermostat button (MIN to MAX)
max being the coldest
position.
BEFORE OPERATING
Final Check
Before you start using the appliance check that:
1. The feet have been adjusted for perfect levelling.
2. The interior is dry and air can circulate freely at the rear.
3. The interior is clean as recommended under "Cleaning and care."
4. The plug has been inserted into the wall socket and the electricity is switched on. When
the door is open the interior light will come on.
And note that:
5. You will hear a noise as the compressor starts up. The liquid and gases sealed within the
refrigeration system may also make some (noise), whether the compressor is running or
not. This is quite normal.
6. Slight undulation of the top of the cabinet is quite normal due to the manufacturing
process used; it is not a defect.
7. We recommend setting the thermostat knob midway and monitor the temperature to
ensure the appliance maintains desired storage temperatures (See section Temperature
Control and Adjustment).
8. Do not load the appliance immediately it is switched on. Wait until the correct storage
temperature has been reached. We recommend checking the temperature with an accurate
thermometer (see; Temperature Control and Adjustment).
11
Advertisement
Table of Contents
