Installation; Connection Overview - Power Dynamics CSP8 Instruction Manual

INSTALLATION

1. Drill a hole in the ceiling, big enough to fit the
speaker (check technical specification sheet for
size).
2. If the sound system is turned on, turn it off
before making any connection.
3. Connect the speaker via two cables to the
sound system (see below for a connection
overview); when connecting several speakers,
make sure that all speakers have the same
polarity and that the amplifier is not overloaded.
Before starting with the installation, you must
clarify how many speakers you would like to
install in the room
4. Insert the speaker in the hole
5. Use the clamps to secure the speaker

CONNECTION OVERVIEW

4