User Manual
Installation & Operation
Front:
•
Host: Connect a Type C source (i.e. laptop or tablet) using a USB 3.2 / 3.1 Gen 1 or above Type C
Male to Male cable. Please Note: Type C source connected must support DisplayPort Alternate
mode; it can also be powered from the PD 3.0 port connecting a Type C PD power supply (not
included).
•
USB: Connect USB Type C devices (support up to 5Gbps).
•
USB/BC 1.2: Connect USB Type A devices (support up to 5Gbps and Battery Charging 1.2 for fast
charging).
•
AUDIO: 3.5mm stereo input/output to connect headphones, speakers or microphone.
•
SD/MicroSD: Card reader for SD and microSD cards
Rear:
•
LAN: Connect to a network LAN using a Cat.5e or above cable.
•
USB: Connect USB Type A devices (support up to 5Gbps).
•
DP: Connect a DisplayPort monitor using a DisplayPort Male to Male cable.
•
HDMI: Connect a HDMI monitor using a HDMI Male to Male cable.
•
PD 3.0: Connect a Type C PD power supply (i.e. of your laptop or tablet) to provide power to the
host computer.
Please Note: The Type C source connected must support PD, the charging power depends on the
PD power supply connected (up to 100W).
•
DC 12V: Connect the included 12V 2A Power Supply to give power to the docking station.
English