Child Lock; Activate Child Lock; Deactivating Child Lock - Bosch WQG241000 Instructions For Use And Assembly

requirements
¡ After drying, the display shows
nen: "End"
¡ or during operation:.
Pull out the condensed water
1.
container horizontally.
Empty the condensed water
2.
container.
Make sure to slide in the
condensed water container
before operating the device.
→ "Push in the condensate
container ", page 35
Condensate container
slide in
Requirement: The condensed water
container → Page 34 is removed from
the device.
Push in the condensed water
▶
container as far as it will go.
1 3 parental controls
S.
Secure your device against
accidental use of the controls.

13.1 Activate child lock

Press both buttons
▶
for seconds.
a The display shows
a The controls are locked. a The
parental controls also remain
active after switching off the device.
13.2 Deactivate child lock
Requirement: To deactivate the child
lock, the device must be switched on.
Press both buttons
▶
for seconds.
a Goes out in the display
Parental controlsde
3 sec. approx. 3
.
3 sec. approx. 3
.
35