Summary of Contents for DUUN HTS305 Mk2
- Page 1 Duun Industrier as 7630 Åsen, Norway www.duun.no HTS305 Mk2 Instruction manual Serial number: from HTS305-130001...
-
Page 2: Machine Indetification
Congratulations on your Duun Duun HTS305 Mk2 scraper blade. All Duun tractor operated machines have been engineered and tested in close cooperation with representative users to produce functionally safe and user-friendly machines. Please read this instruction manual before using the machine. -
Page 3: Table Of Contents
CONTENT MACHINE INDETIFICATION SAFETY WARRANTY TERMS TECHNICAL DATA SERVICE AND MAINTENANCE DECLARATION OF CONFORMITY... -
Page 4: Safety
Safety All operators, mechanics and the owner must always work carefully with agricultural machinery. Read and observe safety instructions in this instruction manual. Be particularly aware of warning signs with this symbol, it marks measures that must be carried out in order to avoid accidents. The symbol appears in the instruction manual and on warning signs on the machine. - Page 5 6. Hydraulic high fluid pressure Be careful when you work with hydraulics. Wear eye protection and gloves. Hydraulic oil under high pressure may penetrate the skin and cause serious infections. See a doctor if you have sustained an injury. Make sure no one is close by when performing hydraulic functions.
-
Page 6: Warranty Terms
Replaced parts are to be kept until a decision has been made with reference to the claim and the replaced parts are to be forwarded to Duun Industrier as for assessment if so required. As the employment of the product is beyond our control, we may only guarantee the quality and do not accept liability for the product's general performance. -
Page 7: Technical Data
Technical data... - Page 8 Weight 305 600 kg w/hydraulics and wheels Height of the blade: 700 mm Rotation of the main blade’s edge 286 degrees Total boom length 2120 mm The main width of the blade 3050 mm. The maximum swing angle boom 25/20 degrees with hydraulics The max.
-
Page 9: Service And Maintenance
Service and maintenance The hydraulic valves are set to 220 bar pressure. Changes to this are not permitted and any warranty liability is void in such a case. After 5 hours of use - check all screw connections. Check all lubrication points regularly and add if it is necessary...
Need help?
Do you have a question about the HTS305 Mk2 and is the answer not in the manual?
Questions and answers