Vivosun HR-20 Instruction Manual

Auto rewind water hose reel

Advertisement

AUTO REWIND WATER HOSE REEL
INSTRUCTION MANUAL
Quality
Outlet
Hose
Read the instruction manual carefully before using the tool and
follow all given instructions.Save the instructions for further reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HR-20 and is the answer not in the manual?

Questions and answers

Summary of Contents for Vivosun HR-20

  • Page 1 AUTO REWIND WATER HOSE REEL INSTRUCTION MANUAL Quality Outlet Hose Read the instruction manual carefully before using the tool and follow all given instructions.Save the instructions for further reference.
  • Page 2 AUTO REWIND WATER HOSE REEL INSTRUCTION MANUAL HANDLING AND OPERATION 1.Fasten metal mounting to the wall or ceiling with screw. 2.Drill 4x M8 holes to match the holes located in the Mounting Bracket. 3.Connect the hose reel to the Mounting Bracket with the Pivot Pin. 4.It is recommended to install the mounting bracket 0.8 metre from the mounting bracket to floor.
  • Page 3 (1) Hold the hose at the yellow waring mark and pull with a jerking motion until the hose retracts. (2) Place the item with its right side down, pull on the hose until it retracts. Hose Hose Working/Burst Outer casing Model Temperature Size of Inlet length material Pressure material HR-20 8Bar/24 Bar -5℃-45℃ 3/4” HR-30...
  • Page 4 AUTO REWIND WATER HOSE REEL...

This manual is also suitable for:

Hr-30

Table of Contents