Meusburger H 4062 User Manual

User manual – Assemby table H 4062
1. User instructions:
1.1. Purpose and validity of document:
This document contains the information that is necessary for the proper use of the products described therein. It is intended for
use by technically qualified personnel. Qualified personnel are persons who, by virtue of their training, experience and instruction,
in conjunction with their knowledge regarding the relevant standards, provisions, accident prevention regulations and operating
conditions, have been authorised by the Plant Safety Officer to carry out the required activities in order to ensure that potential
hazards are recognized and avoided.
1.2. Visual representation of safety instructions:
Wear safety footwear:
Risk of crushing!
Trip hazard:
2. General safety instructions:
2.1. Intended use:
The assembly table is used in order to facilitate the installation and maintenance work on moulders moulds, die cast and
moulds and punching tools. It is only intended for moulds and tools that possess sufficient stability by virtue of the ratio of their
footprint-to-height ratio. Proper use of the assembly table also includes compliance with the instructions regarding safety,
operation, maintenance and servicing which form part of this user manual.
2.2. Technical specifications:
Description
Dimensions (w x l x h)
Unladen weight
Maximum connection pressure
Maximum load on the table
Maximum load on the moving plates (per plate)
Maximum tool size
Maximum tool overhang over moving plates
Meusburger Georg GmbH & Co KG | Kesselstr. 42 | 6960 Wolfurt | Austria
T +43 5574 6706-0 | sales@meusburger.com | www.meusburger.com
Attention
Unit H 4062/496/1156
[mm] 526 x 1186 x 860
[kg] 320
[bar] 6
[kg] 3000
[kg] 2000
Width 500
[mm]
Height 1000
[mm] 80 on all sides
H 4062/796/1496 H 4062/996/1846
826 x 1526 x 880 1026 x 1876 x 700
700 1200
6 8
3000 5000
2000 2500
Width 800 Width 900
Height 1000 Height 1300
100 on all sides 50 on all sides