Advertisement

Quick Links

ASSEMBLY & INSTALLATION SHEET
FOR TRENDZ OUTDOOR FIREPLACES
A Trendz Fireplace is a precast concrete structure with a steel fire box insert.
Burton
TOOLS & COMPONENTS REQUIRED
Installation
Applicable
Mechanical
Task
Models
lift
(HIAB)
Fireplace
Structure
Douglas
Y
Hudson
Y
(Concrete)
Burton
Y
Mini Burton
Y
Firebox
Insert
All Models
(Steel)
Woodbox
(GRConcrete) All Models
Y*
Burton,
(Steel)
Y*
Mini Burton
(GRConcrete) All Models
(Concrete-
All Models
Y*
polished)
Chimney
Burton
(Concrete)
Y
Extension
Blocks
Douglas,
(Concrete)
Y
Hudson
All Models
(Concrete)
Y
* Items are typically delivered with concrete fireplace structure. It may not suit to position
these items into final location at time of fireplace install, however it helps to use mechanical
lift to place them nearby for an easier 2 man lift into final position.
** A sackbarrow will help to move GRC Woodboxes into position without damaging corners
(Especially if already plastered). Bottlejacks and support blocks are required to support
weight of concrete hearths while aligning bolts.
Email fires@trendzoutdoors.co.nz Freephone 0508 252 784 Visit www.trendzoutdoors.co.nz
Mini Burton
Mechanical
2 Man
1.3 ton
Ladder
lift
lift
swiftlift
(heights
clutch
(Sackbarrow/
bottlejacks)
1.5mtr)
2***
2***
2***
2***
Y
Y**
Y
Y
Y**
Y
Y**
Y
2***
2***
4***
Douglas
Concrete
Wheel
Concrete
Infill
Barrow/
drill with
Trowel
10mm
over
(Volume)
bit
Y
0.3****
Y
0.3****
0.4****
Y
0.25****
Y
Y
Y
Y
Y
Y
Y
*** Ensure your crane/ HIAB provider supplies these (Hudson requires 2 x 2.5 ton).
**** Only required if your installation uses infill rather than anchor brackets (see
relevant 'Trendz Precast Fireplace Design' Engineers drawings for spec for your fireplace). Due
to volumes required Trendz recommends using concrete from a local ready-mix supplier.
***** This is for when the fire is coming with foundation brackets.
Page 1
Hudson
Hex key/
Crescent/ Socket
Driver
bit 5mm
13mm 15mm 16mm 19mm
Y*****
Y*****
Y
Y
Y
Y
Y
Y
Y
Phillips
screw
driver
Y
Y

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Burton and is the answer not in the manual?

Questions and answers

Summary of Contents for TRENDZ OUTDOORS Burton

  • Page 1 ASSEMBLY & INSTALLATION SHEET FOR TRENDZ OUTDOOR FIREPLACES A Trendz Fireplace is a precast concrete structure with a steel fire box insert. Burton Mini Burton Douglas Hudson TOOLS & COMPONENTS REQUIRED Installation Applicable Mechanical Mechanical 2 Man 1.3 ton Ladder...
  • Page 2 12x M10x30mm bolts/washers, 4x sleeve anchor screws • Concrete cap (Douglas only) • Steel flange/3x Sleeve Anchor Screws (Burton/Mini Burton only) • Black stainless-steel flue (Burton/Mini Burton) (May be sent separately on courier) Any optional accessories will be supplied with all bolts etc required for installation.
  • Page 3 M10 x 60 concrete screws supplied. Install concrete cap (Douglas) or steel flange (Burton/ Mini Burton). Do not install stainless steel flue until all cladding/ painting is complete and (optional) steel wood boxes are installed. Pre-plastered and painted Burton and Mini Burton: Place your fireplace on your prepared concrete pad.
  • Page 4 Douglas, Hudson, and Burton square chimney). The ADD cowl for the round flue on the Burton and Mini Burton just slides inside the flue and doesn’t need to be riveted. Steel Wood Box: (Burton and Mini Burton only) Place the main top plate over the flue flange.

This manual is also suitable for:

Mini burtonDouglasHudson

Table of Contents