Toshiba GN-1040 Operator's Manual page 22

1. Setting Up Wireless Network
8.
NOTE: In the RADIUS SERVER NAME, enter the user name in "Server Name@FQDN" format.
Example: wlanserver@toshiba.com
9.
NOTE: The encryption intensity between each encryption is:
AES(CCMP) > TKIP > Dynamic WEP
22
Specify the following items and press the [NEXT] button.
FULL AGREEMENT of SERVER NAME
Select the [ON] button to confirm whether the RAIUS server name in the server
certification file and the input RADIUS server name is same or not. When the
[ON] button is selected, press the [RADIUS SERVER NAME] button to enter the
RADIUS server name.
ENCRYPTION INTENSITY
Select the encryption intensity.
Specify the following items and press the [NEXT] button.
ENCRYPTION BETWEEN AP AND STA.
Select the encryption type that is used for the communication between Access
Point and this equipment.
[TKIP] — Select this to use TKIP encryption. The TKIP provides a different key
for per packet with a message integrity check. This key will be changed for
every fixed interval.
[AES(CCMP)] — Select this to use AES encryption. The AES is the next-
generation cryptography algorithm that the U.S. government improves to replace
the DES and 3DES.
[Dynamic WEP] — Select this to use Dynamic WEP encryption. The Dynamic
WEP provides the encryption using WEP technology and it allows the WEP key
to change dynamically for every fixed interval. The Dynamic WEP does not
support the PEER KEY for IEEE802.1x.
GN-1040 Operator's Manual — Setting Up the Infrastructure Mode