Specifications - Sanyo PLV-HD2000 Specifications

Native 2,048 x 1,080 Panels*
The PLV-HD2000N/E employs three high-precision LCD panels of native
2,048 x 1,080 resolution. They project the high-resolution images of the
2K x 1K digital cinema format in full resolution.
Newly Developed 12-Bit Signal Processing Circuit
Sanyo has developed a 12-bit signal processing circuit,
providing full 2-3 pulldown compatibility, motion adaptive
line interpolation and progressive scanning of 1080i HDTV
signals. It helps assure impressive image quality from vir-
tually any source, including HDTV content.
Bright 7,000 Lumens
The PLV-HD2000N/E uses four high-intensity 300-watt UHP lamps to
achieve 7,000 lumens of brightness. If a lamp should burn out, a fail-safe design
automatically switches the lamp mode without interrupting the projection.
Multi-Versatile Interface Platform (MVIP) System
The PLV-HD2000N/E has four slots for accommodating interface boards,
which allows the user to interchange any of the supplied boards with any
desired optional board. RS-232C input and cross-through output terminals
are also provided for easy and flexible system configuration.
HDTV 1080-24p/25p Compatible
In addition to HDTV 1080i, the PLV-HD2000N/E accommodates 1080-24p
and 1080-25p signals as well.
Rich 36-Bit Color
The 36-bit color display reproduces 68,719 million colors to achieve color
expression with superb depth and subtleness.
High Color Purity Optical System
This advanced system improves the color purity of the three primary col-
ors (red, blue, and green) to deliver an overall color performance that's ide-
al for digital cinema.
Abundant Optional Lenses
A wide variety of optional lenses, from short to long-
throw, are provided to match various applications. The bay-
onet-mount system makes replacement easy.
Motor-Driven Lens Shift
This function allows the user to position the im-
age easily (up/down and left/right) even after
the projector is installed. It is especially useful
when aligning images from two stacked units.
C aution : Please consult the instruction manual to ensure safe and proper operation of the product.
Distributed by:
http://www.sanyo-lcdp.com/english/
* An industry first for transmissive LCD
projectors, as of May 12, 2006.
(According to a Sanyo survey.)
P ictured : LNS-S03
O ther F eatures
• Dual link SDI compatible
• On Start: Allows quick projection simply by switching the system on
• Power management function automatically turns the power off when no
signals enter
• Retractable carrying bar
• Adjustable leg system with a pop-up handle and shuttle dials
• Many presentation support functions, including freeze and No Show
• Rear and suspended projection capability
• Wireless/wired mouse remote control

Specifications

Model number
PLV-HD2000N/E
LCD panels 1.64-inch TFT p-Si x 3
Aspect ratio 17:9
Number of pixels
2,211,840 (2,048 x 1,080) x 3, Total: 6,635,520 pixels
Lens Option
Lamp
300 W UHP lamp x 4
Screen size*1
40 -600
Color reproduction Full color (68,719 million colors)*2
Brightness*3*4
7,000 lm
Uniformity*3
90%
Contrast*3 1,000:1 (full on/full off)*5
Resolution
RGB 2,048 x 1,080 dots
Terminals
Input 1
Video: BNC x 4 (Dual Link SDI compatible*6: In x 2, Out x 2)
Input 2 Video: BNC x 5 (RGBHV, Y-Pb/Cb-Pr/Cr)
Input 3 Video: Video DVI-I x 1 (HDCP compatible*7)
Input 4
MVIP slot
Control ports Serial In x 1, Serial Out x 1, Service (USB type B) x 1, Wired remote x 1
Color systems PAL/ SECAM/ NTSC/ NTSC 4.43/ PAL-M/PAL-N
Scanning frequency H sync: 15-120 kHz, V sync: 24-120 Hz, Dot clock: 230 MHz
Power source HD2000N:120V AC 50/60Hz*8
HD2000E:200-240V AC 50/60Hz
Power consumption
1,700 W (20 W in standby mode)
Dimensions (W x H x D)
581 x 252 x 783 mm*9
Weight
37.2 kg
*1 Screen size varies according to a mounted lens
*2 With a 12-bit signal input to the Dual-Link SDI
*3 Average values at shipment are shown, in accordance with the JIS X 6911:2003 specification format for data
projectors. Measurement meathods and conditions are based on Appendix 2 of the standard.
*4 With the LNS-S03, in 4-lamp mode
*5 With auto lamp control on
*6 Dual Link SDI input accepts RGB and Y/Cb/Cr formats.
*7 Projector may not display video from DVI input if the HDCP standard is changed.
*8 Plug : NEMA 5-20P, 20A,125VAC.
*9 Protrudings not included.
O ptions
• DVI board POA-MD18DVI
• 5BNC board POA-MD16VD1
• V ideo /Y/ C board POA-MD03VD2A
• PJ-N et O rganizer board POA-MD13NET2
• DVI to M ini D-S ub 15 cable POA-CA-DVIVGA
• R emot e control cable POA-CA-RC30
• O ptional L enses LNS-W01Z/ LNS-W02Z/ LNS-W03/ LNS-W04/ LNS-W06/ LNS-S02Z/
LNS-S03/ LNS-M01Z/ LNS-T01/ LNS-T02/ LNS-T03
SANYO E lectric C o ., L td .
AV C ompany
©2006 SANYO Printed in Japan
SML069
Pixelworks ICs are used in this projector
2006.8. SI.