Makita MAC5200 Owner's Manual page 26

*Only those involved in the work should be in the
vicinity. Children especially must be kept away at
all times.
There may be local regulations concerning noise
which must be complied with by keeping noise levels
within prescribed limits. In certain cases, shutters
should be used to contain noise.
Do not play with the contact element:
it prevents
accidental discharge, so
it
must be kept on and not
removed. Securing the trigger in the ON position is
also very dangerous. Never attempt t o fasten the
trigger.
Do
not operate a tool if any portion of the tool
operating controls is inoperable, disconnected,
altered, or not working properly.
Operate the tool within the specified air pressure of
4.5 - 8.5
kgf/cm'G
(65
-
120
PSIG) for safety
and longer tool life. Do not exceed the recommended
max. operating pressure of
8.5 kgf/cm'G (120
PSIG). The tool should not be connected to a source
whose pressure potentially exceeds
1 4 . 0
kgf/cm'G
(200 PSIG).
I
L -
Shutter
0 5 kgf/cm* G
8
5 kgf/cm* G
(1
20
PSIG) (120 PSIG)
4