Subscribe to Our Youtube Channel
Summary of Contents for Rcom MAX 50
- Page 1 Love of life begins with "Rcom" REV. 3.1 DIGITAL EGG INCUBATOR USER'S MANUAL MAX 50...
-
Page 3: Table Of Contents
Remove the power cord from outlet. Do not touch. Ground Connection for preventing electric shock. Tip : References or useful suggestions in using Rcom product Warning of actions which may be dangerous or cause damage to the incubator. DIGITAL INCUBATOR... -
Page 4: Introduction (1) Rcom 50 Introduction
The Rcom 50 is designed easy to use and simple to use as a customer orientated product, but please remember that the user's incubation knowledge and proper operation are very important for the best incubation result. -
Page 5: Introduction
1. Introduction (2) Safety Precautions Electrical hazards Be careful the details below when you use. Do not use a damaged power Do not pull the cord when Never pull the plug out of the Do not twist or crush electric Do not insert multiple cord or loose outlet. -
Page 6: Identification Of Parts And Composition
If you register your information with Universal Tray Divider Power Connecting (the rear) your machine’s serial number on our web-site(www.Rcom.co.kr), Adjust the space of dividers For connecting power cord. according to egg size. you can get 2 year warranty service. -
Page 7: Function Of Digital Control & How To Operate
(4) Function of Digital Control & 1. Introduction How to Operate Function of Digital Control & How to Operate Temp. Display Humidity Display Humidity UP Button Temp. UP Button Setting Humidity Up Setting Temp. Up Temp. DOWN Button Humidity DOWN Button Setting Temp. -
Page 8: Before Use
(1) How to Assemble the Incubator / 2. Before use Egg-turning plate How to Assemble View Window ▶ Lock the four locking buttons at the front and rear of the incubator. BACK Universal Tray ▶ Insert the power cord in the socket at the back of the main body. -
Page 9: Before Use
(2) What is an incubation room? / 2. Before use Preparation for Incubation What's an Incubation Room? / Preparation for Incubation The Incubation Room is a confined space for setting and operating an incubator. Because the incubation room environment has a considerable effect on hatch rate, it's recommended to control the environment for setting up an incubator;... - Page 10 (2) What is an incubation room? / 2. Before use Preparation for Incubation Some gap (about 2mm) around the eggs is needed for easy egg turning as shown on the below. ▼ About 2mm About 2mm ※ When you use the 'universal rolling divider' which is sold separately, be careful to adjust the distance of rolling divider so that eggs do not roll out of position.
-
Page 11: Function Settings
(1)Incubator Start&Termination / 3. Function Settings Return to Factory Setting (2) Changing Cels.&Fahr. How to start incubation ▶ If you connect the incubator with power cord, second dot " . " of temp. display is blink with alarm. Press SET to remove blink and then it starts incubation with existing temperature and humidity. -
Page 12: Function Settings
Temperature and humidity can be different from normal setting levels according to the surrounding environment. (Refer to a incubation guidebook which is supplied separately.) Temperature and humidity is optimized when Rcom products are released. We do no recommend customers to recalibrate by their own. If you need to recalibrate, please visit our website (www.rcom.co.kr→Download→Manual) or ask purchase place. - Page 13 (3) Temperature & Humidity Setting / 3. Function Settings How to Set Egg-Turning How to Set Abnormal High or Low Temperatue Alarm ▶ What is Abnormal High or Low Temperature Alarm? It is alarm soulds when incubator temperature is higer or lower than setting value because of various reasons such as room temperature change or disorder of temperature controlling system.
-
Page 14: Incubation
(Please move all the eggs 1~3 days before hatching into Hatcher or Brooder.) Hatcher : The machine for egg-hatching. Operate it 1~3 days before egg-hatching. (Rcom MARU H&B) Brooder : The machine makes baby chickens or birds warm up against cold or cool environment. You can set up proper temperature and humidity. -
Page 15: How To Clean
5. How to Clean (1) How to Disassemble ▶ Pull out the electric cord from the connecting jack and also take out the plug from the outlet. Don't turn off the power soon after using the incubator, as this may cause a break down due to moisture left inside the main controller. -
Page 16: How To Clean
5. How to Clean (2) How to Clean Start the vacuum cleaner to remove the dust as shown on the right and thoroughly shake out the minute dust with a fine brush. If the incubator goes through incubations several times, feather, dust, shell, etc. -
Page 17: Product Information
Frequently Asked Questions (FAQ) Servicing All our Rcom digital incubators of Autoelex Co., Ltd. are made by precision systems under strict quality control. But occasionally some defective products are found on the way of their distribution. If any problem occurs, then please contact Rcom service center or distributorsin your country. - Page 18 6. Product Information (2) Troubleshooting For more detail, please check our website at Troubleshooting www.Rcom.co.kr diagnosis CIRCUMSTANCE ITEMS TO BE CONFIRMED SOLUTIONS No signs of power ▶ Check electric cord is properly connected. ▶ Connect the cord again. ▶ Check if there is a power outage.
- Page 19 ※ Refer to website for how to register. (Free 1 years gurantee in case not registerd.) ※ Product Registration Procedures If you are a new member of Rcom, you need to log in our website at www.Rcom.co.kr 1. Click “SIGN UP” on top of the right corner.
- Page 20 Rcom USB 50, PRO 50, MAX 50 PART LIST Names of goods Names of goods Image P a rt N o Image P a rt N o (*.Compatible) (*.Compatible) H50 SMPS H50-A641-10 PCB ASM H50-H601-10 H50 Body TH V2 Sensor...
- Page 21 Rcom USB 50, PRO 50, MAX 50 PART LIST Names of goods Names of goods Image P a rt N o Image P a rt N o (*.Compatible) (*.Compatible) H50-H621-10 H50 Small Tray H50-H691-10 H50 Slider Roller H50 MAX H50-H606M-10...
- Page 22 Rcom KINGSURO MAX 20 (MX-SURO) Rcom MAX 20 (MX-20) Rcom PRO 20 (PX-20) Rcom reptiles PRO 90 (PX-R90) Rcom reptiles MAX 60 (MX-R60) R com PRO 50 (PX-50) R com MAX 50 (MX-50) Rcom BROODER&ICU Rcom DIGILOG Rcom DIGILOG2 (MX-BS500(N)) (PX-V1)
- Page 24 SELLER MANUFACTURER ● OFFICE : 218, Sangdong-ro, Sangdong-myeon, Gimhae-si, Gyeongsangnam-do, 50805 Korea ● TEL : +82-55-1588-8771 ● FAX : +82-55-1544-2862 ● E-MAIL : Rcom@Rcom.co.kr Rcom is the Best Design with High Quality, Value, and Perf o rmance!
Need help?
Do you have a question about the MAX 50 and is the answer not in the manual?
Questions and answers