Honda CR-V 2024 Owner's Manual page 635

uuIf a Tire Goes FlatuChanging a Flat Tire
■
Replacing the Flat Tire
634
1. Remove the wheel nuts and flat tire.
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the compact spare tire.
4. Screw the wheel nuts until they touch the
lips around the mounting holes, then stop
rotating.
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
80 lbf∙ft (108 N∙m, 11 kgf∙m)
1Replacing the Flat Tire
Do not over tighten the wheel nuts by applying extra
torque using your foot or a pipe.
Models with wheel cover
Make sure the wire support ring is hooked into the
clips around the edge of the wheel cover.
Clips Clips
Align the valve mark on the wheel cover to the tire
valve on the wheel, then install the wheel cover.
Valve Mark