Table of Contents
Advertisement
Quick Links
BUILT-IN UNDERCOUNTER COMMERCIAL
OUTDOOR BEER DISPENSERS (KEGERATORS)
ALL SAFETY RULES AND OPERATING INSTRUCTIONS
NOTE: These units are designed for the cooling and dispensing
of beer only, and are not recommended for storing perishable
foods such as meats or dairy products.
Write Model and Serial Numbers here:
Model _________________________
Serial No. ______________________
SPR7OSSTBC
SPR7OSSTBCADA
Instruction Manual
BEFORE USE, PLEASE READ AND FOLLOW
FELIX STORCH, INC.
Summit Appliance Division
An ISO 9001:2015 registered company
770 Garrison Avenue
Bronx, New York
www.summitappliance.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Summit Commercial SPR7OSSTBC
Summary of Contents for Summit Commercial SPR7OSSTBC
- Page 1 BUILT-IN UNDERCOUNTER COMMERCIAL OUTDOOR BEER DISPENSERS (KEGERATORS) SPR7OSSTBC SPR7OSSTBCADA Instruction Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS NOTE: These units are designed for the cooling and dispensing of beer only, and are not recommended for storing perishable foods such as meats or dairy products.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. - Page 3 Use two or more people to move and install the appliance. Failure to do so can result in back or other injury. To ensure proper ventilation for your appliance, the front of the unit must be completely unobstructed. Choose a °...
-
Page 4: Location Of Parts
Location of Parts Twin taps Railing Temperature control dial (thermostat) and interior light canister holder Stainless steel door Front ventilation slots (kick plate) Compressor Leveling legs step NOTE: Models with suffix “NK” do not include a tap kit... -
Page 5: Technical Information
Technical Information Model Numbers SPR7OSSTBC Standard height SPR7OSSTBCADA 32.25” high for ADA compliant counters Descriptions Capacity Two 1/6 kegs Electrical Input 115V AC/60Hz Rated Current 1.3A Defrost Automatic Refrigerant R134a (1.8 oz.)* Installation Built-in or free-standing Unit Dimensions 23.75" x 24.75" x 32” (32.25" to hinge cap) (W x D x H) Models with “NK”... -
Page 6: Installation Instructions
Installation Instructions Parts List Remove all packing materials and parts. Inspect to make sure all parts listed below are present and in good condition: 1 double draft arm assembly (with washer) 1 CO cylinder 1 CO regulator 2 keg taps (American Sankey type) 1 cleaning kit Vinyl tubing 1 stainless steel (removable) floor to protect the unit during keg insertion... - Page 7 Electrical Connection: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. This unit should be properly grounded for your safety.
- Page 8 Adjusting the Tilt If your beer cooler seems unsteady or you would like the door to close more easily, you can use the leveling legs to adjust the tilt of the unit. Be sure that the unit is in its final position when making adjustments to the tilt and that it is plugged into a grounded 3-prong outlet.
- Page 9 Regulator and CO Cylinder NOTE: Your CO cylinder is shipped empty to avoid any possible accidents during transportation. When you purchase the first keg of beer, have your beer distributor fill the CO cylinder. You must read and understand the following procedures for CO cylinders before installation: 1.
- Page 10 d. Place the CO 2 tank and CO 2 regulator valve component into the cabinet and fix the CO 2 tank with tank bracket and retainer (See Figure 8). 3. Install the beer keg: Note: This unit can hold two one-sixth barrel kegs, but not a full-size keg. Place the beer keg into the cabinet and firmly connect the keg’s opening to the connection port of the mixed ball valve.
- Page 11 Operating Your Kegerator Temperature Control: Your appliance’s evaporator system is out of sight behind the interior rear wall. The interior temperature is controlled with a thermostat knob located inside the unit, towards the upper right-hand corner. Turn the knob clockwise from the STOP (0) position toward the higher numbers for colder temperatures.
-
Page 12: Care And Maintenance
Care and Maintenance Cleaning Your Appliance: Unplug the appliance, turn the thermostat to STOP (0) and remove all contents, including shelves. Wash the inside surfaces with a solution of lukewarm water and vinegar. Wipe dry with a clean, soft cloth. Wash the outside cabinet with a solution of warm water and mild liquid detergent. - Page 13 Draft Beer Troubleshooting Problem Cause Correction Beer is cloudy: The Excessively low Drain a few ounces before drinking. beer in the glass temperatures may Raise the temperature setting of the unit. appears hazy and not cause hazy or clear. cloudy beer, particularly when the beer lies in the cold coil for long...
- Page 14 Beer has off taste: Improper Brush and clean the tap properly. It Often bitter and bite-y; cleaning of the should be scoured using a detergent, sometimes completely then rinsed clean. lacking flavor and zest. Contaminated air Beer tube should be examined. If It may also have an line contaminated, it should be replaced.
-
Page 15: General Troubleshooting
General Troubleshooting When using this appliance, you may come across some problems that in many cases result from improper handling and can easily be eliminated. TROUBLESHOOTING GUIDE The appliance fails to operate after being connected to the power source. Check whether the power supply is active and that the thermostat is not set to the STOP (0) position. -
Page 16: One-Year Limited Warranty
Limited Warranty ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company.
Need help?
Do you have a question about the SPR7OSSTBC and is the answer not in the manual?
Questions and answers