Table of Contents
Advertisement
Quick Links
TERMITRAB complete
Surge protection for signal circuits of the MCR
technology
Technical Note
107820_en_00
1
Description
The TERMITRAB complete product range offers surge
protection solutions for signal circuits in measurement and
control technology. The protective elements are
characterized by their narrow design.
In the event of an overload, a mechanical status indicator
indicates the disconnection of a protective element. The
status indicator operates without additional auxiliary power.
The protective elements can be integrated into existing
remote signaling concepts. Remote signaling modules are
available for this. The protective elements are monitored
visually. If a protective element is disconnected in the event
of an overload, the disconnect device closes the monitoring
channel. Group remote signaling is triggered. The status is
indicated on the faulty device.
Pluggable protective devices and products with disconnect
knives enable easy testing.
The CHECKMASTER 2 from Phoenix Contact performs a
test sequence for the protective plugs and documents the
results.
TERMITRAB complete is available with screw connection
and Push-in connection technology. Further product
features round off the surge protection system.
Make sure you always use the latest documentation.
For the technical data, please refer to the relevant product at phoenixcontact.net/products.
© PHOENIX CONTACT
2017-04-12
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Phoenix Contact TERMITRAB complete
Summary of Contents for Phoenix Contact TERMITRAB complete
-
Page 1: Description
Group remote signaling is triggered. The status is indicated on the faulty device. Pluggable protective devices and products with disconnect knives enable easy testing. The CHECKMASTER 2 from Phoenix Contact performs a test sequence for the protective plugs and documents the results. TERMITRAB complete is available with screw connection and Push-in connection technology. -
Page 2: Table Of Contents
TERMITRAB complete Table of contents Description ..........................1 Table of contents ........................2 Ordering data .......................... 3 Order key..........................4 Versions ..........................5 ......................5 Pluggability and testing ....................5 Indirect grounding (floating) ......................5 Knife disconnection ................... 6 Status indicator and remote signaling set Connection and operation ....................... -
Page 3: Ordering Data
TERMITRAB complete Ordering data Description Type Order No. Pcs./Pkt. The current ordering data for the relevant products can be found at phoenixcontact.net/products. Accessories Type Order No. Pcs./Pkt. Marker pen without ink cartridge, for manual labeling of X-PEN 0,35 0811228 markers, labeling extremely wipe-proof, line thickness 0.35 mm (Marking) -
Page 4: Order Key
TERMITRAB complete Order key Order key - with example: 24DC Versions: Product family ... -
Page 5: Versions
The plug can be tested with the CHECKMASTER 2 from level (terminal blocks 3 - 6) is not desirable, versions with an Phoenix Contact. To this end, a barcode is printed on the additional gas discharge tube for the DIN rail are used. -
Page 6: Status Indicator And Remote Signaling Set
TERMITRAB complete When open (unscrewed), the function screw of the knife The function signaling modules independently return to disconnection is 7 mm above the upper edge of the housing. “OK” mode when the faulty surge protection module is replaced. In order to minimize contamination of the switching contacts in harsh and dusty ambient conditions, the knife The receiver module includes a relay contact. -
Page 7: Connection And Operation
TERMITRAB complete Connection and operation Safety instructions The installation and startup of this device may only be performed by an authorized (electrically) skilled person. The 0,5 - 0,6 Nm relevant country-specific regulations must be observed. 3,5 mm WARNING: Risk of electric shock and fire ²... -
Page 8: Insulation Testing
For products with Push-in connection technology • Take measurements at the additional test opening. These test openings can accommodate a probe tip that is 2 mm in diameter. PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany 107820_en_00 8 / 8 phoenixcontact.com...
Need help?
Do you have a question about the TERMITRAB complete and is the answer not in the manual?
Questions and answers