Download Print this page

Functions - Breville the Smart Waffle Pro BWM604 Instruction Book

Advertisement

Available languages

Available languages

Functions

BEFORE FIRST USE
Remove and safely discard any packing
material, promotional labels and tape from the
waffle maker.
1. Wipe the waffle maker cooking plates with
a damp sponge or cloth. Dry thoroughly
and close the lid.
2. Place the waffle maker on a flat, dry surface.
Ensure there is a minimum distance of
4" (10cm) of space on all sides of the waffle
maker. Do not place anything on top of the
waffle maker.
3. Unwind the power cord completely and
insert the power plug into a grounded
110/120V power outlet.
4. Turn the POWER dial to the ON position.
The PREHEATING light will flash.
5. Use the darkness control dial to adjust
the brownness of your waffle. There are
5 darkness settings ranging from LIGHT
to DARK. The waffle maker will adjust the
cooking time based on your selected waffle
color. To customize the cooking time and
waffle color, select the MANUAL setting.
When making your first waffle, we suggest
using a middle setting.
NOTE
When using the waffle maker for the first
time, you may notice a fine smoke haze. This
is caused by the initial heating of some of the
components and is not a cause for concern.
6
6. Once the waffle maker has completed
preheating, an audible alert will sound, the
PREHEATING light will switch off and the
READY light will illuminate.
7. Open the lid. Pour approximately ½ cup of
batter evenly on the center of each waffle
square. The batter should cover the peaks of
the waffle plate.
8. Close the lid but keep the locking latch
open. Once the lid is closed the READY
light will switch off and the COOKING
light will illuminate.
9. You can lift the lid during cooking to check
the doneness of your waffles. However, if
the lid remains open for more than
7 seconds, the COOKING light will switch
off and the READY light will illuminate.
When the lid is then closed, the cooking
cycle will start again from the beginning.
10. At the end of the cooking cycle, an audible
alert will sound, the COOKING light
will switch off and the READY light will
illuminate. Open the lid and carefully
remove your waffles. Do not use metal
utensils as they can scratch the
non-stick surface.
NOTE
If waffles are not removed immediately after
the cooking cycle has completed, an audible
alert will sound every 30 seconds.
11. To cook more waffles, repeat steps
7–10 above.
12. If you are not cooking any more waffles,
turn the POWER dial to the OFF position.

Advertisement

loading

This manual is also suitable for:

The smart waffle pro bwm602