Download Print this page

Qlightec S60AD/QAD Series Manual

Led steady/flash & electric horn

Advertisement

Quick Links

LED Steady/Flash & Electric Horn
QAD100H-N/ QAD125H-N
30
50
65
Thank you for purchasing Qlight's products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the Power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the Power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
QAD100H-N
-
110/220
[Model number]
[Voltage]
|
|
• QAD100H-N
• 12/24-DC12V-24V
• QAD125H-N
• 110/220
- AC110V-220V
Please scan the QR code for more
detailed product information.
www.qlight.com
100
115
HORN
HORN
Product Specifications
Model
-
R
number
[Color]
|
QAD100H
R-Red
A-Amber
G-Green
B-Blue
QAD125H
• Protection rating : IP65
• Ambient operating temperature : -30°C to +50°C
Sound pattern and
Voltage
Current
volume
DC12V
Max.
• Bit Input : 5Ch
-24V
1.270A
• Binary Input : 30Ch
• Built-in sounds
: Max.100dB
AC110V-
Max.
(Based on WA-Ch4)
220V
0.250A
DC12V
Max.
• Bit Input : 5Ch
-24V
1.130A
• Binary Input : 30Ch
• Built-in sounds
: Max.115dB
AC110V-
Max.
(Based on WA-Ch4)
220V
0.275A
1
Certificates Weight
Color
0.92Kg
R-Red
A-Amber
G-Green
B-Blue
1.12Kg

Advertisement

loading

Summary of Contents for Qlightec S60AD/QAD Series

  • Page 1 LED Steady/Flash & Electric Horn QAD100H-N/ QAD125H-N HORN HORN Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use. Precautions for Safety Failure to follow the instructions below may cause a loss of life or serious physical injury. 1.
  • Page 2: Wiring Instructions

    Dimensions (Units : mm) QAD100H-N Ø97 2-Ø5.6 FITTING HOLES Ø10 CABLE ENTRY QAD125H-N Ø116 2-Ø6.5 FITTING HOLES Ø10 CABLE ENTRY Wiring Instructions QAD100H-N EXTERNAL CONTACT EXTERNAL TRANSISTOR-NPN Ch 1 Ch 1 Amber Amber Ch 2 Ch 2 Green Green Ch 3 Ch 3 Blue Blue...
  • Page 3 Bit/ Binary Input Method Depending on Wiring Method ■ Bit Input Mode Ch 1 Ch 2 Ch 3 Ch 4 Ch 5 The channel selection method using a ※ • Bit input mode(using external line) allows you to transistor is the same as the external contact method, please refer to the select one of five sound options by switching on figure on the right.
  • Page 4: Volume Adjustment

    Top Control Configuration Volume Adjustment • The volume output of this product is adjustable. • Turn the volume dial clockwise to increase the volume, and Volume switch turn counter clockwise to decrease the volume. Light function Sound switch • There will be no sound when the dial is put at MIN. switch Volume Dial MAX.
  • Page 5 Sound Type and Combination Manual ■ Bit Input - Playing Built-in Sound ■ Binary Input - Playing Built-in Sound • In bit input mode, you can chooses one sound from 1 • In binary input mode, you can chooses one sound from 30 sound by configuring the 5 channels.
  • Page 6 Operation Method and Setting When Using a Built-in Sound Source Bit input Binary input Play one of five sounds from Play one of 30 sounds 6 groups ■ When using a built-in sound source in bit input mode ■ When using a built-in sound source in binary input mode ※...
  • Page 7 Product installation direction ■ Install the product in accordance with the manual. Otherwise rainwater or moisture may penetrate into the product. ㆍBEACON/SIGNALING LIGHT ※ For products with a protection rating of less than IPX4, please install it vertically. Power cord inlet part shall not be facing the sky. ㆍ...
  • Page 8 MEMO...
  • Page 9 MEMO...
  • Page 10 Specification and dimensions listed in this catalogue subject to change without notice for product quality improvement. For your safety The newest product information is available on our website.(www.qlight.com) Please read the instruction manual attached to the product carefully before installation and use. Qlight Co., Ltd.

This manual is also suitable for:

Qad100h-nQad125h-n